RACE GAS ULTRA

$35.99

SKU RACE GAS ULTRA Category

Description

RACE GAS ULTRA is specifically designed for the requirements of very high compression, boosted or nitrous engines. ULTRA, when mixed with pump gasoline, will create racing fuel with octane between 108 and 112 r+m/2. Like our original product, ULTRA increases the octane, chemical oxygen and chemical energy of the fuel to equal commercially distilled racing fuel.

RACE GAS ULTRA is a much different formula than original RACE GAS. “In testing we found the requirements of very high compression engines were different than engines with lower compression or lower boost. We needed to create a formula that could achieve the high octane while still meeting our requirements of high chemical energy and high chemical oxygen in a consistent and predictable way. We chose to use the highest quality pharmaceutical grade chemicals and to avoid using alcohols or naphthalene which don’t meet our design standards” said Dan Muldowney.

“Further, when we did our engine dyno testing we did “like for like” testing against commercial racing fuel. We first did a series of “pulls” with commercial racing fuel. We then drained the fuel and fuel rail and added RACE GAS ULTRA blended with pump gas. We then repeated the test. We did not change the engine set up or tune during testing”

“We found that we were able to create the same horse power and torque as commercial racing fuel and that the fuel performed consistently under different conditions.”

1 Can RACE GAS ULTRA + 4 gallons of 89 = 4 gallons of 108 Octane R+M/2

1 Can RACE GAS ULTRA + 4 gallons of 91 = 4 gallons of 110 Octane R+M/2

1 Can RACE GAS ULTRA + 4 gallons of 93 = 4 gallons of 112 Octane R+M/2

Additional information

Weight 2 lbs
Dimensions 5 × 6 × 2 in
AN Fitting Style
Temp Range
Size
Series Cooler
Series / Row Number
Series / Number of Rows
Seal Size
Row / Flow
ROTOR FACE
Style
Position
Part Color
Pack Size
PART
ORB Size / AN Size
ORB Size
AN Size
Rotor Side
NPT Size
Rotor Face.1
Height.1
Description.1
Compound.1
Caliper Color.1
Angle.1
Temperature
Type
Thread Size/Flow
Thread Size
Thread Base
Thread
Number of Rows
NPT / AN Size
Sizes
Clutch Type / Offset
Metric Size
Hard Line Size
Comopunds
Comopund
Color Choice
Color Caliper
COMPOUND
Compounds
CALIPER COLOR
Brembo System
BSP Size
Available Options
Application
ANGLE
Compouds
Compouns
Component
Comound
Metric / AN Size
Master Cylinder Size
KIT APPLICATION
Inside Diameter
Hose Size
Hose Length
HEIGHT
DESCRIPTION
Fittings Size
Fitting Type
Fitting Size
Filter Thread
Fan Size
End Fitting
Degree Curve
Size & Style